Wireless camera, 2.4 GHz video transmiter, Security products - RF AMPLIFIER

HOME

RF AMPLIFIERS

Receiver Amplifiers

OUR PRODUCTS

	SERVICES & SUPPORT
	Our Lab and Engineering staff will give you an excellent service.Custom designs are available upon request. Please send your inquiries to: info@rf-video.com

Model:AMP18M/24

Data sheet PDF

HIGH GAIN AMPLIFIER FOR 2.4 GHz RECEIVERS

This is an excellent small amplifier for any receiver (not for transmitters). It will increase a gain of your receiver without adding large 2.4 GHz antennas. You can connect any 2.4 GHz antenna to input connector. This low noise amplifier will give you an extra 18 dB gain in 2.4 GHz band. The output connector is a male SMA type. Battery 9 V will last 14-20 hours.
Dimensions : 1.0 " X 0.6 "

SPECIFICATIONS:

DC VOLTAGE : 9 V - 12 V	FREQUENCY: 2300 - 2500 MHz
GAIN: 18 dB	SIZE: 1.0 " X 0.6 "
CONNECTOR: SMA	CURRENT CONSUMPTION: 55 mA / 9 V

Model:amp23m/900

Data sheet PDF

HIGH GAIN AMPLIFIER FOR 900 MHz RECEIVERS

BATTERY POWER: 7.5 V-12 V	CURRENT CONSUMPTION: 55 mA
GAIN: 23 dB	SIZE: 1.0 " X 0.6 "
ANTENNA CONNECTOR: SMA / BNC

Model:amp900/23m

Data sheet PDF

HIGH GAIN AMPLIFIER FOR 900 MHz RECEIVERS

This is an excellent amplifier for any 900 MHz receiver. This low noise amplifier will give you an extra 23 dB! gain in 900 MHz band. Also it has a Band pass filter for 900 MHz band to cut all undesired frequencies! It will increase a gain of your receiver without adding large Yagi antennas. You can connect any 900 MHz antenna to this amplifier. The output connector is a BNC type. The power supply is included.
Dimensions: 3 " X 2.0 " X 0.7 ".

SPECIFICATIONS:

FREQUENCY: 900 - 928 MHz	CH 1 - CH 4 (2.4 GHz BAND)
CURRENT CONSUMPTION: 35 mA / 9 V	SIZE: 3 " X 2.0 " X 0.7 "
CONNECTOR: BNC	GAIN: 23 dB

Model:amp-4786

Data sheet PDF

HIGH GAIN AMPLIFIER FOR TV UHF RECEIVERS

This is an excellent small amplifier for any TV UHF receiver (not for transmitters). It will increase a gain of TV UHF set, VCR or receiver in 470 MHz- 860 MHz range with over 23 dB. The output cable is open. Input connector is F TV type. Battery 9 V will last 14-20 hours.
Dimensions: 1.0 " X 0.7 " X 0.2 " .

SPECIFICATIONS:

BATTERY POWER: 7.5 V-12 V	FREQUENCY: 470 - 860 MHz
GAIN: 23 dB	SIZE: 1.0 " X 0.7 " X 0.2 "
INPUT CONNECTOR: TV F TYPE	CURRENT CONSUMPTION: 30 mA

Model:amp-58/18

Data sheet PDF

HIGH GAIN AMPLIFIER FOR 5.8 GHz RECEIVERS

This is an excellent small amplifier for any receiver (not for transmitters). It will increase a gain of any 5.8 GHz receiver without adding larger 5.8 GHz antennas. This low noise amplifier will give you an extra 15 dB gain in 5.8 GHz band. The output connector is a male SMA type. Battery 9 V will last 14-20 hours.
Dimensions: 1.0 " X 0.6 " X 0.2 ".

SPECIFICATIONS:

BATTERY POWER: 9 V	FREQUENCY: 5600 - 5900 MHz
ANTENNA CONNECTOR: SMA	SIZE: 1.0 " X 0.6 " X 0.2 "
CURRENT CONSUMPTION: 55 mA / 9V

Model:LNamp-0512

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 500-1200 MHz RECEIVERS

This is a special Low-noise amplifier for 500 -1200 MHz receiver(not for transmitters). It will increase gain of 500 MHz- 1.2 GHz receivers without adding large antennas. You can connect any 500 -1200 MHz antenna to input connector. This low noise amplifier will give you an extra 35 dB gain in 500 -1200 MHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

ANTENNA CONNECTOR: SMA	FREQUENCY: 500 - 1200 MHz
GAIN: 35 dB	SIZE: 2.8 " X 1.5 " X 0.75"
DC VOLTAGE: 12 V	CURRENT CONSUMPTION: 120 mA

Model:LNAMP-1214

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 1200-1400 MHz RECEIVERS

This is a special Low-noise amplifier for 1.2 -1.4 GHz receiver (not for transmitters). It will increase gain of 1.2 GHz- 1.4 GHz receivers without adding large antennas. You can connect any 1.2 -1.4 GHz antenna to input connector. This low noise amplifier will give you an extra 32 dB gain in 1.2 -1.4 GHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

CURRENT CONSUMPTION: 100 mA	FREQUENCY: 1.2 - 1.4 GHz
GAIN: 32 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA

Model:LNamp-1314

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 1350-1450 MHz RECEIVERS

This is an excellent small amplifier for 1.35 -1.45 GHz receivers (not for transmitters). It will increase a gain of your receiver without adding large antennas. You can connect any 1.35 -1.45 GHz antenna to input connector. This low noise amplifier will give you an extra 33 dB gain in 1.35 -1.45 GHz band. The output connector is a male SMA type. Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE : 9 V-15 V	FREQUENCY: 1.35 - 1.45 GHz
GAIN: 33 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA	CURRENT CONSUMPTION: 80 mA

Model:LNamp-1620

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 1600-2000 MHz RECEIVERS

This is an excellent small amplifier for 1.6 - 2.0 GHz receivers (not for transmitters). It will increase a gain of your receiver without adding large antennas. You can connect any 1.6 - 2.0 GHz antenna to input connector. This low noise amplifier will give you an extra 29 dB gain in 1.6 - 2.0 GHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE: 12 V	FREQUENCY: 1.6 - 2.0 GHz
GAIN: 29 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA	CURRENT CONSUMPTION: 80 mA

Model:LNamp-2224

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 2200-2400 MHz RECEIVERS

This is an excellent small amplifier for 2.2 - 2.4 GHz receivers (not for transmitters). It will increase a gain of your receiver without adding large antennas. You can connect any 2.2 - 2.4 GHz antenna to input connector. This low noise amplifier will give you an extra 30 dB gain in 2.2 - 2.4 GHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE : 9 V- 15 V	FREQUENCY:2.2 - 2.4 GHz
GAIN: 30 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA	CURRENT CONSUMPTION: 80 mA

Model:LNamp-5060

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 5000-6000 MHz RECEIVERS

This is an excellent small amplifier for 5.0 - 6.0 GHz receivers (not for transmitters). It will increase a gain of your receiver without adding large antennas. This low noise amplifier will give you an extra 30 dB gain in 5.0 - 6.0 GHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE : 9 V- 15 V	FREQUENCY: 5.0 - 6.0 GHz
GAIN: 30 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA	CURRENT CONSUMPTION: 125 mA

Model:LNamp-6472

Data sheet PDF

SPECIAL LOW NOISE AMPLIFIER FOR 6400-7200 MHz RECEIVERS

This is an excellent small amplifier for 6.4 - 7.2 GHz receivers (not for transmitters). You can connect this amplifier to 6.4 - 7.2 GHz antenna. This low noise amplifier will give you an extra 23 dB gain in 6.4 - 7.2 GHz band. The output connector is a male SMA type.
Dimensions : 2.8 " X 1.5 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE : 9 V- 15 V	FREQUENCY: 6.4 - 7.2GHz
GAIN: 23 dB	SIZE: 2.8 " X 1.5 " X 0.75"
ANTENNA CONNECTOR: SMA	CURRENT CONSUMPTION: 100 mA

Model:LNamp-7G

Data sheet PDF

SPECIAL SUPER AMPLIFIER FOR 10 MHz-7200 MHz RECEIVERS

This is an excellent small amplifier for 10 MHz- 7.2 GHz receivers (not for transmitters). You can connect this amplifier to 10 MHz - 7.2 GHz equipment. This SUPER WIDEBAND amplifier will give you an extra 23 dB gain in 10 MHz- 7.2 GHz band. The output connector is SMA or N type.
Dimensions : 2.0 " X 1.0 " X 0.8"

SPECIFICATIONS:

DC VOLTAGE : 12 V- 15 V	FREQUENCY: 10 - 7000 MHz
GAIN: 23 dB	SIZE: 2.0 " X 1.0 " X 0.8"
ANTENNA CONNECTOR: SMA OR N TYPE	CURRENT CONSUMPTION: 90 mA

Model:AMP-72/MC20

Data sheet PDF

SPECIAL RECEIVER AMPLIFIER 72 MHz

This small receiver amplifier is made for increasing the sensitivity and range of 72 MHz remote systems. This amplifier incorporates a helical filter, low noise preamplifier design and it has an excellent rejection of unwanted signals.
Dimensions : 2.8 " X 1.7 " X 0.75"

SPECIFICATIONS:

DC VOLTAGE : 9 V- 12 V	CENTER FREQUENCY:72 MHz
TOTAL AMPLIFICATION: 20 dB/72.460 MHz	SIZE: 2.8 " X 1.7 " X 1.5 "
MIL. GRADE UNIT	CURRENT CONSUMPTION: 30 mA